Power Foam Engine Cleaner & Degreaser
Product Code: APFSC-EA
Improves starting and performance. Cleans dirty intake systems and spark plugs and frees sticky valves. Also removes gum, varnish and carbon deposits from engine exterior surfaces. Recommended for carburetors and fuel injectors. Works inside and outside the engine.
Package sizes include:
• 18-oz. Spray Cans
- PRODUCT DESCRIPTION
- AMSOIL Power Foam cleaner removes gum, varnish and carbon deposits for more efficient fuel economy and improved overall engine performance. AMSOIL Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. Effective in both two-cycle and four-cycle engines, AMSOIL Power Foam eliminates engine ping and keeps carburetors and injector systems properly tuned. AMSOIL Power Foam is safe for fuel injectors, catalytic converters and emission control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.
AMSOIL Power Foam cleaner contains a powerful foaming agent and special high boiling solvents that penetrate rust and grease. It cuts through rust so bolts can be loosened or tightened easily and washes clean, leaving no residue to attract dirt. Power Foam also helps reduce pollution caused by dirty, rough-running engines.
NOTE: Power Foam is not available in California due to the state’s tightening environmental regulations. - PERFORMANCE FEATURES
- Removes gum, varnish and carbon deposits
- Suppresses engine ping
- Cuts through rust and grease
- Helps improves fuel economy
- Reduces Pollution
- Frees stuck choke mechanism
- DIRECTIONS
- Run engine to normal operating temperature and remove air cleaner assembly. While engine is running, spray entire can of foam directly into intake. Turn off engine and allow to sit for 5-10 minutes. Restart engine and drive to blow out deposits.
- RECOMMENDATIONS
- Avoid contact with hoses. To prevent the dissolving of paint, do not overspray. AMSOIL Power Foam is not recommended for use in diesel engines.
Heavy-Duty Degreaser
Product Code: ADGSC-EA
Fast-Acting Equipment and Surface Degreaser.
AMSOIL Heavy-Duty Degreaser (ADG) is formulated with powerful and fast-acting solvents, attacking petroleum-based grime on a molecular level to loosen its hold on metal, concrete, engines and other surfaces. Its active citrus formula makes cleaning easy and leaves a clean scent.
Package sizes include:
• 15-oz. Spray Cans
- PRODUCT DESCRIPTION
- AMSOIL Power Foam cleaner removes gum, varnish and carbon deposits for more efficient fuel economy and improved overall engine performance. AMSOIL Power Foam cleans intake valves, intake manifolds and throttle plates to keep the combustion intake system running at peak efficiency. Effective in both two-cycle and four-cycle engines, AMSOIL Power Foam eliminates engine ping and keeps carburetors and injector systems properly tuned. AMSOIL Power Foam is safe for fuel injectors, catalytic converters and emission control devices. It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.
AMSOIL Power Foam cleaner contains a powerful foaming agent and special high boiling solvents that penetrate rust and grease. It cuts through rust so bolts can be loosened or tightened easily and washes clean, leaving no residue to attract dirt. Power Foam also helps reduce pollution caused by dirty, rough-running engines.
NOTE: Power Foam is not available in California due to the state’s tightening environmental regulations. - PERFORMANCE FEATURES
- Dissolves oil, tar and grime
- Removes sticky residue
- Works fast
- Low-VOC formula
- Non-foaming
- APPLICATIONS
- Metal Surfaces
- Oil-Stained Concrete
- Automotive and Truck Engines
- Adhesive-Coated Surfaces
- Heavy-Duty Equipment
- Gears and Chains
- Powersports Equipment
- Farm Equipment and More
- DIRECTIONS
- Spray, allow product to penetrate grime for 1-2 minutes.
- Wipe with clean cloth or continue spraying to flush contaminants.
- Repeat as necessary.
Test on small area before using on painted or plastic surfaces. Wipe off overspray. Do not apply while equipment is running.
Silicone Spray
Product Code: ALSSC-EA
Perfect for lubricating non-metal surfaces that contact metal such as nylon, cardboard, fiberglass, wood or plastic surfaces. Special non-staining formula. USDA H-1 rated for incidental contact with food. Excellent protectant for waterproofing leather boots, shoes, jackets, suede etc.
Package sizes include:
• 10-oz. Spray Cans
- PRODUCT DESCRIPTION
- Silicone Spray (ALS) is perfect for lubricating non-metallic surfaces that come into contact with metal, nylon, cardboard, fiberglass, wood or plastic surfaces. Use anywhere a light-duty or silicone lubricant is required. Special non-staining formula. USDA H-1 rated for incidental contact with food. Excellent protectant for waterproofing leather boots, shoes, jackets, suede, etc.
- PERFORMANCE FEATURES
- Formulated for use on metal-to-nonmetal or nonmetal-to-nonmetal contact surfaces
- Protectant helps prevent rubber cracking and drying
- Displaces water
- Excellent mold release lubricant
- USDA H-1 rated
- Point and spray convenience
MP Metal Protector
Product Code: AMPSC-EA
High-Performance Spray-On Metal Surface Protectant.
Displaces water and protects metal surfaces from rust and corrosion. Provides a light film that prevents metal-to-metal contact. Excellent for use on guns, hinges, squeaky mechanical objects, electrical systems and more. Penetrates existing rust buildup. Also dries wet electrical systems.
Package sizes include:
• 8.75-oz. Spray Cans
- PRODUCT DESCRIPTION
- AMSOIL Metal Protector (AMP) is a high-performance, easy-to-use spray-on product that lubricates, displaces moisture, protects against corrosion and penetrates to free rusty parts. It does not form gum or sludge.
AMSOIL Metal Protector effectively lubricates moving parts, silencing squeaks without gumming up mechanisms. It displaces moisture from freshwater or saltwater to help prevent corrosion, and it is the product of choice for drying and protecting electrical and ignition systems. Metal Protector penetrates deep through rust and corrosion to restore movement of rusty parts. It is excellent for protecting firearms and other fine componentry, and it helps prevent jamming, especially in cold weather. Metal Protector contains no silicone, and is compatible with plastic, leather, fabric, fishing line and paint.
- RECOMMENDATIONS
- Shake well before use. Spray product on area to be treated. For best results, do not wipe off. Protectant film carrier will evaporate, leaving Metal Protector protection in place. Disconnect power source to electrical equipment before spraying.
- Cuts through rust & frees frozen components
- Helps protect against rust & corrosion, even in salt water
- Displaces water
- Stops squeaks
- Clean
- Sprays into hard-to-reach places
- Protects electrical equipment
- Ideal for firearms & other fine components
- Lubricates moving parts
MP Heavy-Duty Metal Protector
Product Code: AMHSC-EA
Made with special rust and corrosion inhibitors. Excellent on metal surfaces, leaves a long-lasting protective coating. Protectant against the effects of salt, moisture & chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle chains. Won’t “sling-off”. Dry to the touch.
Package sizes include:
• 16-oz. Spray Cans
- PRODUCT DESCRIPTION
- AMSOIL Metal Protector (MP) and AMSOIL Heavy Duty Metal Protector (MPHD) are easy-to-use spray-on synthetic products that protect metal surfaces, displace water and silence squeaks. MP cuts through rust and corrosion to restore free movement of “frozen” hardware parts. MPHD lubricates metal surfaces, leaving a dry waxlike protectant film. Neither forms gum or sludge.
AMSOIL MP is the product of choice for drying electrical and ignition systems and protecting electrical equipment from freshwater and saltwater damage. AMSOIL MP is also the product of choice for protecting firearms and other fine componentry. It contains no silicone. AMSOIL MP is compatible with plastic, leather, fabric, fishing line and paint.
AMSOIL MPHD is the product of choice for metal surfaces that require a heavy duty lubricant or are exposed to the damaging effects of salt, moisture or chemical corrosion. It is ideal protectant for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating wheelwells and other metal surfaces exposed to water, dirt or road salt.
- PERFORMANCE FEATURES
- Protectant against rust & corrosion, even in salt water
- Displaces water
- Stops squeaks
- Lubricates metal surfaces
- Leaves a dry, long-lasting, waxlike film
- Lubricant does not attract dust
- Does not sling off
- Sprays into hard-to-reach places
- Ideal for chains & other heavy-use items
- RECOMMENDATIONS
- Spray product on area to be treated. For best results, do not wipe off. Protectant film carrier will evaporate, leaving MPHD on treated surface.
Engine Fogging Oil
Product Code: FOGSC-EA
A highly-effective rust preventative designed to protect internal engine components during storage or long periods of inactivity. Ideal protectant for outboard motors, lawn and garden equipment, motorcycles, snowmobiles, ATVs, motor homes and generators or any equipment with a two- or four-stroke engine.
Package sizes include:
• 12-oz. Spray Cans
- PRODUCT DESCRIPTION
- Two- and four-stroke recreational vehicles, hand-held power equipment, small engines, construction and farm equipment are commonly operated seasonally or infrequently, then stored for long periods of time. During these periods of inactivity, and as a result of fluctuations in ambient temperatures, water vapor can form condensate within the engine. When this condensate comes into direct contact with steel and iron components, it forms surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is taken out of storage and dry started. In addition, fuel within stored equipment tends to oxidize and form varnish and sludge deposits that clog injectors, fuel lines and carburetors, stick floats and cause poor engine performance, starting problems, increased maintenance expenses and decreased equipment life.
- PERFORMANCE FEATURES
- Most two- and four-stroke motor oils are formulated to have an affinity to engine component surfaces, acting as a barrier that keeps condensate from contacting engine components and forming corrosion. However, the effectiveness of motor oil in this area diminishes with time.
AMSOIL Engine Fogging Oil (FOG) offers superior protectant film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean applications, while reaching more components and offering complete distribution of the oil, something especially beneficial in applications with horizontal cylinder orientation, such as outboard motors. Consult equipment owners manual for application directions.
Engine and Transmission Flush
Product Code: FLSHCN-EA
Prepares Engines and Transmissions For New Oil. Engineered for both gasoline and diesel engines and automatic transmissions. Helps improve operating efficiency, increase fuel economy and reduce emissions.
Package sizes include:
• 16-oz. Bottle
• 5-gallon pail
• 55-gallon drum
- PRODUCT DESCRIPTION
- AMSOIL Engine and Transmission Flush (FLSH) cleaner helps restore fuel economy, increase operating efficiency and reduce emissions in gasoline and diesel engines, and automatic transmissions. Its potent, detergent-based formula cleans sludge and deposit build-up, promoting lower operating temperatures and reduced oil consumption. AMSOIL Engine and Transmission Flush is safe on parts and can be easily disposed of with waste oil.
- RESTORES VEHICLES TO LIKE-NEW
- New engines and transmissions run more efficiently, but over time they gather harmful deposits that cause power and performance loss. Stop-and-go driving, prolonged idling, short trips that do not allow the engine to reach full operating temperature, towing, the ingestion of airborne dirt, fuel dilution, water condensation and oxidized oil all can promote sludge build-up in motor oil and transmission fluid. As it settles, sludge clogs narrow oil passages, restricting oil flow to vital parts, especially the upper valve train area.
In transmissions, deposits can form on clutch plates, causing hesitation and erratic shifting. Ultimately clutch glazing can set in, reducing the life of the transmission. Deposits in engines and transmissions can accelerate wear, causing power loss and increased fuel consumption.
- Cleans engines and transmissions for improved efficiency, fuel economy and lower emissions
- Prolongs equipment life
- Detergent-based formula more environmentally friendly
- Compatible with seals and gaskets
- One-treatment results
- Easily disposed of with waste oil
Installing new oil or transmission fluid into a dirty vehicle may not be enough to remove deposits and increase efficiency. The detergents and dispersants in some lubricants may not be able to handle leftover sludge and deposits, and the new lubricant soon becomes unfit for service, accelerating the formation of even more harmful deposits.
- CLEANS HARMFUL DEPOSITS
- Because Motorcycle Octane Boost contains active detergents, it can help maintain efficiency. For clean up, however, AMSOIL recommends treating gasoline with AMSOIL Quickshot®, which contains a greater concentration of cleaning agents.
- AMSOIL ENGINE AND TRANSMISSION FLUSH BENEFITS
- Unlike many flush products, AMSOIL Engine and Transmission Flush features a multi-use formulation that dissolves and disperses sludge, varnish and deposits in both engines and automatic transmissions. Due to its detergent-based formulation, used AMSOIL FLSH can be easily disposed of with waste oil, making it more user-friendly. Its advanced formula of light base oil technology, powerful detergents and dispersants provides safe cleaning action. AMSOIL FLSH is compatible with both petroleum and synthetic oils, preparing poorly maintained equipment for installation of new oil. It represents the first step toward restoring neglected equipment to top-notch performance. AMSOIL Engine and Transmission Flush provides the following benefits in only one treatment:Gasoline and Diesel Engines
- Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions
- Helps quiet lifter noise
- Promotes lower operating temperatures through sludge removal
- Easy disposal
Automatic Transmissions- Cleans deposits in oil cooler and ports
- Helps unclog fluid passages
- Cleans deposits and varnish from clutch plates, helping improve efficiency
- Promotes smoother operation and transmission life through reduced shift delay
- APPLICATIONS
- AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. It is not recommended for CVT transmissions or differentials.
- DIRECTIONS FOR USE
- Though it works in one treatment, AMSOIL Engine and Transmission Flush is safe enough to be used at every oil change. If using a flushing machine, follow the manufacturer’s recommendation. Otherwise, use the following guidelines:
Engine: Add 16 oz. bottle of AMSOIL Engine and Transmission Flush to engine oil fill port. Idle the engine for 10-15 minutes, then immediately drain the oil. Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill engine with new engine oil in the viscosity grade recommended by the manufacturer.Transmission: Engage emergency brake. Add 16 oz. bottle of AMSOIL Engine and Transmission Flush to transmission oil fill port. Idle for 10-15 minutes; shift through drive and reverse. Do NOT place vehicle under heavy load. Drain entire transmission and torque converter of fluid. FILTER MUST BE CHANGED prior to refilling with new transmission fluid.
Miracle Wash Waterless Wash and Polish Spray
Product Code: AMWSC-EA
Miracle Wash® Waterless Wash & Wax (AMW) is a unique dry car wash and wax that delivers outstanding performance and quick, easy and economical application. No water is required; specially formulated surfactants lift dirt and other particles from the surface and hold them in suspension. Miracle Wash then acts as a shield, protecting the surface from abrasion while you wipe the dirt clean.
Package sizes include:
• 13-oz. Spray Cans
- PRODUCT DESCRIPTION
- Miracle Wash® Waterless Wash & Wax (AMW) is a unique dry car wash and wax that delivers outstanding performance and quick, easy and economical application. No water is required; specially formulated surfactants lift dirt and other particles from the surface and hold them in suspension. Miracle Wash then acts as a shield, protecting the surface from abrasion while you wipe the dirt clean.
- Requires just two easy steps – spray and wipe
- Leaves vehicles with a fantastic shine and tough protective finish
- No soap or water required
- Repels dust and light dirt
- Protects against the sun’s ultraviolet rays
- Effective on virtually all non-porous and painted surfaces
- PERFORMANCE FEATURES
- The active ingredients in the Miracle Wash formula are surfactants. These specialized chemicals not only lift the dirt off of the surface of your car, they also hold them in suspension while you wipe the surface clean. Throughout the process, Miracle Wash acts as a protective barrier between the dirt particles and the surface, protecting the finish from abrasion. But Miracle Wash does more than just clean. Its specialized antistatic agents repel dust and light dirt, maintaining your cars brilliant shine long after you have finished washing it. And Miracle Wash even protects against the damaging effects of the suns ultraviolet rays.
Miracle Wash is highly effective on virtually all nonporous and painted surfaces. At home, at work or in the shop, Miracle Wash is the only product you need to keep surfaces looking clean and new. Miracle Wash stacks up against all other car wash cleaners on the market.
Apply Miracle Wash with a convenient aerosol spray. Miracle Wash not only lifts the dirt off of the surface of your car, it also holds particles in suspension while you wipe the surface clean. Specialized antistatic agents repel dust and light dirt, maintaining your cars brilliant shine long after youve finished washing it. And Miracle Wash even protects against the damaging effects of the suns ultraviolet rays.
- RECOMMENDATIONS
- Try Miracle Wash On:
- RV’s
- Bicycles
- Motorcycles
- Boats
- Kitchen Appliances
- Countertops
- Windows
- Mirrors
- Desktops
- Musical Instruments