By-Pass Filter Elements
Product Code: EABP90-EA
The Ea By-Pass Oil Filter (EaBP) provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates by filtering oil on a “partial-flow” basis.
- Product Description
- AMSOIL Ea By-Pass Oil Filters (EaBP) provide the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, AMSOIL Ea By-Pass Filters operate by filtering oil on a “partial-flow” basis. They draw approximately 10 percent of the oil pump’s capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL Ea By-Pass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.
- Higher Efficiency
- AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.
- Superior Construction
- The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.
- Longer Lasting
- When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ filter, the EaBP Filter should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.
- Increased Oil Capacity
- The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.
- Soot Removal
- AMSOIL has designed a new high-efficiency by-pass filter element that is also a soot removal device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. According to ISO 23556 testing, these filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.
- By-Pass Filtration Benefits
- Dramatically Extended Drain Intervals
- Improved Oil Cooling
- Increased Filtration Capacity and Life
- Efficient Small Particle and Soot Removal
- Significantly Extended Engine Life
- Equipment Constantly Runs on Clean Oil
- Increased Engine Efficiency
- Remove Particles Less Than One Micron
Marine Bypass Filtration System
Product Code: BMK18-EA
Offers easily accessible remote mounting capability for a full-flow spin-on oil filter and a spin-on by-pass oil filter for marine applications. Must purchase separately the spin on adapter that matches the engine’s filter thread.
Single Remote Bypass Kit
Product Code: BMK21-EA
Engine wear is caused by dirt particles of about 5 microns. By-pass filtration removes particles less than one micron or larger, virtually eliminating engine wear. Filters all of the oil in a 6 quart system in about 5 minutes. Without bypass filter element – 1 required. For use with EaBP90, EaBP100 or EaBP110 Element.
DUAL-GARD Oil Bypass System
Product Code: BMK22-EA
Links two AMSOIL By-Pass Filter Elements together for engines with sump capacities greater than 20 quarts. Includes Flow Restrictor without hardware, hoses or filter elements – 2 required. For use with EaBP90, EaBP100 or EaBP110 Element.
General Use Dual Remote Oil Bypass Unit
Product Code: BMK23-EA
Combines Full-Flow and By-Pass filtration on a single, easy-to-install mount. All installation parts except filter spin-on adapter are included. Must purchase the spin on adapter that matches the filter thread on your vehicle. Without filter elements – 2 required. For use with EaBP90, EaBP100 or EaBP110 Element. Spin-on Adapter BP402M is designed for 2008-Present Chevrolet 1500 & 2500 gas engines.
Ford 7.3L PowerStroke Oil Bypass Unit
Product Code: BMK26-EA
For Ford 7.3L PowerStroke applications. Includes both filters and spin-on adapter.
GM & Duramax 6.6L Oil Bypass Unit
Product Code: BMK27-EA
For Ford 7.3L PowerStroke applications. Includes both filters and spin-on adapter.
BMK30 Heavy-Duty By-Pass Filtration System
Product Code: BMK30-EA
For heavy-duty by-pass applications. Featuring the same synthetic nanofiber media as the rest of the Ea By-Pass Filter family. Filter and hose not included with the BMK30 kit. The EaBP120 Filter and hose (BP250) must be purchased separately.
BK30 Sample Valve Kit for BMK30
Product Code: BK30-EA
Designed for use with the AMSOIL Heavy-Duty By-Pass Filtration System (BMK30). Installs directly onto the BMK30 mount and includes the Deluxe Oil Sampling Valve (G1570), providing samples at the push of a button.
Bypass Spin-on Adapter 1″ – 16
Product Code: BK300-EA
Spin-on adapter for filter threads. Adapts 1″ – 16
Bypass Spin-on Adapter 1.5″ – 16
Product Code: BK301-EA
Spin-on adapter for filter threads. Adapts 1.5″ – 16
Bypass Spin-on Adapter 13/16″ – 16
Product Code: BK302-EA
Spin-on adapter for filter threads. Adapts 13/16″ – 16